- Shopping, made easy.
- /
- Get the app!
Specification
Adjustment method: 360-degree
Number of pulses: 20
Pin Numbers: 5
Shaft Diameter: 6mm/0.24"
Shaft Height: 20mm/0.79"
Rated voltage: DC 5V
Maximum operating current (resistive load):10mA Max
Contact resistance: 100mΩor less(Voltage test at DC 5V 1mA)
Bouncing: 10mS or less (Shaft shall be pushed at 1 cycles/s)
Insulation resistance: 100MΩ Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank)
Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank)
Push-life: 30,000±200cycles(0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
JESSINIE 5Pcs ZMPT101B Voltage Transformer Module Single Phase AC Voltage Transformer Module 5-30V Output Voltage Sensor Signal Acquisition ZMPT101B Power Supply Voltage Module
KWD 5
uxcell 20 x 1/2W Watt 100K ohm 100KR Carbon Film Resistor 0.5W
KWD 2.500
-17%
uxcell 60Pcs 100 Ohm Resistor, 2W 5% Tolerance Metal Oxide Film Resistors, Axial Lead, Flame Proof for DIY Electronic Projects and Experiments
KWD 2.500
33uF 450V 16X25 +/-20% -25°C to +105°C 9PCS Aluminum Electrolytic Capacitors,33 MFD,33uF 450V capacitor,33uF capacitor,450V capacitor,33uF capacitor 450V,450V 33uF capacitor
KWD 4.500
