TCS-34725 TCS34725 RGB Color Light Sensor Colour Recognition Module For Arduino

Applications:

RGB LED Backlight Control

Light Color Temperature Measurement

Product Color Verification and Sorting

Fluid and Gas Analysis

Ambient Light Sensing for Display Backlight Control

Specification:

Detection distance: 3-10mm

Working Voltage: 3.3 or 5V

Low Power: 2.5-uA Sleep State

Strong point: Input Voltage Levels Compatible with VDD or 1.8 V Bus

Feature: I2C Fast Mode Compatible Interface

Advantage: Data Rates up to 400 kbit/s

65-uA wait state with programmable wait state time from 2.4 ms to > 7 Seconds

PINOUT:

LED = LED control input. Leave floating for LED always on. Pull LOW to turn LED off

INT = Interrupt output active LOW. Output is open-collector so requires pull-up resistor. Connects to an interrupt input on the uC if used.

SDA = I2C SDA line. Connects to SDA on uC

SCL = I2C SCL line. Connects to SCL on uC

3V3 = 3.3V output from the on-board 3.3V regulator

GND = Ground connects to ground on the uC

VIN = Power input. Connects to 3.3V or 5V on the uC

Pack included:

5pcs TCS34725 RGB Light Color Sensor Recognition Module