Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.
The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
Widely used in milling machine, drilling machine or other machinery transmission occasions.
uxcell Chain Idler Sprocket, 10mm Bore 1/2" Pitch 13 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 08B Chains
KWD 6
uxcell Chain Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 08B Chains
KWD 6
uxcell #40 Chain Idler Sprocket, 20mm Bore 1/2" Pitch 17 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 08A Chains
KWD 6
uxcell 10 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 6mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
KWD 3.500
