DIYhz Push Button Switch

Product parameters：
- Poles: SPST.
- Terminals: 2 Pin.
- Number of Wire: 2.
- Material: Plastic, Metal.
- Action Type: Momentary.
- Rating Voltage: AC 250V / 1A.
- Contact Type: NO (Normally open), Push and Hold - ON, Release - OFF.

Product Specifications:
- Pin Pitch: 3mm / 0.11".
- Cap Diameter: 6mm / 0.24".
- Thread Diameter: 6.9mm / 0.27".
- Overall Size: 25 x 9mm / 0.98" x 0.35" (Max. L * D).

Product Features:
✔ DIY for refrigerator car circuits and laboratory enthusiasts
✔ The push button switches are used in industrial controlling circuits
✔ For controlling in electromagnetic starter, contactor, relay and other electric circuits.

Warm Tips:
Choose the appropriate electric soldering iron, and speed up the welding speed.
It is recommended to use 20W electric soldering iron to complete the welding in three seconds.
The flux must be the right amount. And try to turn the pins of the switch down when welding.
In addition, it would be better to use plug wire with terminal, such as pins with spring, auxiliary plug and try to avoid direct welding.
Wiring should be slow to avoid damaging the terminals.

Package Content:
6 x Red Push Button Switches