Feature:
1. The shell is made of environmental ABS material, non-toxic and resistant.
2. The three wire leads adopts 0.75mm pure copper core for superior electric conductivity.
3. Stable and reliable performance, will not cause misoperation due to liquid level fluctuations.
4. Widely used for water supply, drainage and liquid level automatic control of septic tank, water tower, water tank and water pool.
5. Simple installation, low cost, long service life.

Specification:
Item Type: Liquid Level Float Switch
Model: KEY-6
Material: ABS
Working Pressure: 1MPa
Working Voltage: 0-250V
Working Current: 8A
Working Temperature: -10~+80°C
Maximum Temperature Resistance: 80°C
Media Specific Gravity: 0.7
Cable Length: 6m
Contact Capacity: 10A AC220V (Resistive)
Contact Form: 1NO, 1NC

Installation Instructions:
Water Supply System
Use black wire and blue wire:
When the float ball is in the lower water level, the contact is on state.
When the float ball is in the upper water level, the contact is off state.

Drainage System
Use black wire and brown wire:
When the float ball is in the upper water level, the contact is on state.
When the float ball is in the lower water level, the contact is off state.
.w-e-text table td,.w-e-text table th,;.w-e-text table,

Package List:
1 x Float Ball
1 x Liquid Level Sensor
1 x Manual