1/4 Push To Connect Fittings Male Air Tool Pneumatic Straight Push Quick Release Connectors Tube Connect Fitting 10pcs

Specifications:
Type: Straight Push-in Connect Fittings
Material: Made of quality copper and nickel
Applicable Tube: PU / PA / PE / PVC
Working Temperature: 32～140°F
Maximum Pressure: 0-1.0mpa | 0-150psi
Negative Pressure:-100Kpa | -29.5 In Hg
Quantity: 10 pieces

Using steps:
1. After cutting the tube, remove the burr and insert one end of the tube into the socket of the joint (must be inserted in the bottom), so that the connection is firm and the sealing effect is achieved.
2. Repeat withdrawal of the pipe. The part that has been worn out should be cut off. After leveling, continue to use.
3. While disassembling the tube, press the connector sleeve with your thumb and pull it out lightly.
4. Once installed, it is only necessary to rotate the joint body to adjust the direction of the tube.