Product Name:Male Elbow Push to Connect Fittings/L Type Male Thread Pneumatic Connector Quick Fittings
Product Size:1/4" Tube OD x 3/8 NPT Thread
Material:Plastic, Copper;Fluid Type:air, vacuum
Working Temperature:32~160 °F/ 0~70°C;Working Pressure:0～150 Psi
Application of Trachea:PU/PE/PA/PVC/Nylon/PTFE
Package Content:10pcs x Male Elbow Push to Connect Fittings

Product Feature：
1.Push-in pneumatic pipe joints are used for pneumatic pipe systems.
2.A wide variety of pipe joints can be used for all needs in the tracheal system.
3.Even after installation,The direction of the pipe can be freely changed
4.Nickel-plated copper body can prevent corrosion and pollution.
5.NPT thread glue plays a sealing role.

Precautions:
1. Do not use other fluids other than air and water.
2. When using hot water or heat medium oil above 60°C, do not use other joints than heat-resistant pipe joints for molds.
3. Do not apply tension, winding, bending and other loads to the pipe joint. Otherwise there is a risk of damage to the connector body.
4. To confirm that the cut surface of the pipe is finally vertical, the outer circumference of the pipe is free of scars and the pipe is not oval
5. After the tube is inserted, pull the tube to confirm that the tube cannot be pulled out.
6. When loosening the tube, please confirm that the internal pressure of the tube is zero.
7. If you have unclear parameters or technical problems, you can consult before placing an order.