Related Items

---

• CGA580 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 580 Cylinder Adapter Made of stainless steel 304 (CGA580, SS316L, Length=88.5mm 1pc) KWD 12
• 4pcs Flow Control Hose Clamp Plastic Tubing Clamps 1/8"-5/32" Tube OD Shut Off Hose Clamp Laboratory Pinch Valve Flow Control Hose Clamp KWD 3
• Valterra 8401X PVC Gate Valve, 110 mm Slip w/Gate Keeper, PVC KWD 29.500
• Conical Reducer with ISO-KF Flange KF16 KF25 KF40 KF50 (KF40 to KF25) KWD 10
• bmotiontech 1.5" OD PVC hose adapter to ISO-KF KF40 NW40 flange for DIY PVC vacuum bellow KWD 10
• bmotiontech over pressure relief valve keeps vacuum chamber below excessive positive pressure < 1.5psig, improved version, One-piece valve body, minimized potential leak (KF25 flange) KWD 22
• Hilitchi 60-Pcs 8-38mm Adjustable All Stainless Steel Worm Gear Hose Clamp Assortment Kit - All Stainless Steel Rust Proof KWD 5
• bmotiontech KF40 flange to Male NPT/MNPT Fitting (ISO-KF KF40 QF40 NW40) (1/2" 0.5 inch MNPT to KF40, Pack of 1 pc) KWD 9.500
• Equal Tee block SS304 with 3 Female NPT FNPT 1/4" 0.25" connections threaded holes, stainless steel 304 forged pipe fittings,1/4" x 1/4" x 1/4" FNPT (2pcs) KWD 11.500
• -8% Air Hose Fitting Kit, 1/4, 3/8, 1/2 Inch Quick Release Pneumatic Push to Connect Fittings Fit for PU/PA/PE/PVC pipes Quick Connect Fittings, 36Pcs KWD 23 KWD 25
• Brennan 2603-12-12-12-FG Forged Steel JIC Flared Tube Fitting, Tee, 3/4" Tube OD JIC Male KWD 5
• SLTC-450 Spring Loaded Stainless Steel T-Bolt Clamp SAE 116 for 4.25" ID Hose, 1 Piece, Polish 4.5"-4.8" (114mm-122mm) KWD 6
• bmotiontech KF40 NW40 Standard Stainless Steel Corrugated Bellow Hose Set, vacuum bellow hose with 2X Al clamp / 2X SS Centering Ring / 2X FKM O-Ring (1800mm / ~6ft KF40, thick wall bellow) KWD 18
• bmotiontech designed Version A ISO-KF KF25 NW25 Flange Vent Valve, air admittance valve, up to air valve for vacuum chamber (KF25 vent valve) KWD 11
• 2PCS One Way Air Check Valve Internal Thread Full Flow Check Valve Compressor Pump Gas Pipe Internal Thread Full Port Check Valve 1/8 KWD 3.500
• bmotiontech PTFE 1/2" 0.5" Male NPT to KF25 adapter fittings adapter interface MNPT to KF25 NW25 KWD 8.500
• bmotiontech ISO-K 63 flange (clamp type) to NW25 KF25 flange reducer converter adapter (ISO-K 63 to KF25 reducer) KWD 18.500
• bmotiontech 1-inch Baseplate Feedthrough bulkhead to KF25 flange, this adapter fits 1" Internal diameter vacuum chamber opening or hole KWD 26
• 2" inches MNPT x KF50 Flange Vacuum fittings adapter, Made of SS304, Male NPT KWD 18.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF25 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF25 90°Angle Valve) KWD 40.500
• ISO-KF NW16 KF16 Flange Ball Valve, Shut Off Valve, Isolation Valve, Good for Vacuum foreline Setup (KF16 Flange) KWD 22
• Traxxas 8630 Front Bulkhead, Black KWD 7
• bmoitontech ISO-KF KF16 NW16 Flange to 3/4" OD PVC Hose Adapter for DIY PVC Vacuum Bellow Hose, hose clamp included (Pack of 2) KWD 13.500
• 3/4 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 1pcs, 3/4" or 20mm) KWD 5.500
• INTSUPERMAI Three-Piece 3/4inch Pneumatic Actuated Ball Valve, Single Acting Globe Threaded Pneumatic Actuator, 304 Stainless Steel for Automatic Control System KWD 41.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF40 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF40 90°Angle Valve) KWD 57.500
• ISO63 ISO-K 63 equal elbow clamp type flange KWD 39.500
• CGA350 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 350 Cylinder Adapter Made of stainless steel 304 (CGA350, SS304, Length=80mm 1pc) KWD 12
• Marshall Excelsior MERG-295HP Compact 2 Stage High Capacity Regulator KWD 18
• 1 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 2pcs, 1 inches ot 25mm) KWD 9.500