Features:
This is a normally open proximity switch sensor with detection distance of 8mm to 10mm. When proximity switch is close to some target object, it will send out control signal. Widely used in automatic control industry for detecting, controlling, and non-contact switching. High sensitivity, quick response, stable performance. Non-contact detection avoids the sensor and the target object from damages.
Specification:
Detection distance: 8mm±10%
Setting distance: 0-7mm
Delay distance: Detection object: Magnetic metal(The detection distance decreases when it is non-magnetic metal)
Standard detection object: Iron 30*30*1mm
Response frequency: 0.5kHz
Supply voltage: DC12-24V (6-36V) impulse (P-P) below 10%
Withstand voltage: AC1000V 50/60Hz 1min
Current consumption: N.P type: Control output: N.P type: Loop protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption
Ambient temperature and humidity: -30-65℃, 35-95%RH
Temperature influence: Temperature range -30-65℃, at 23℃, ±15% detection distance; Temperature range -25-60℃, at 23℃, ±10% 0detection distance
Insulation impedance: >50MΩ
Housing material: brass plating
Detection surface: ABS

Package list:
1 * Inductive Proximity Switch

Note:
1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.