OVERTURE ABS Filament 1.75mm, ABS 1kg Spool (2.2lbs),3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer (Black 1-Pack)

Special Features

[Less Odor, Less Warping & Bubble-Free]--This ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor and low warpage during printing. Complete drying for 24 hours before vacuum packaging. Enclosed chamber is required for better printing quality and durability when printing big parts with ABS filaments
[High Stability and Durability]-- OVERTURE ABS Roll are made by commonly used ABS, a strong and tough thermoplastic polymer—great for creating parts which needs to be resistant to high temperatures; Due to the high stability and various post-processing options (sanding, painting, gluing, filling), our ABS filaments are excellent choice for engineering production or prototyping
[More Humanized Design & Easy to Use] -- Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
[Dimensional Accuracy & Consistency]-- advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these ABS filaments of 1.75 mm diameter, dimensional accuracy +/- 0.05 mm1 kg spool (2.2lbs)
[Cost-effective and Wide Compatibility]-- With over 8 years' 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more

Description

Note: The recommended print setup for Overture filaments could be slightly different from other filaments; Pls read the description below, you may also get some practical suggestions through QA/ Top Review from others.

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature;

2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion ;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

Specification:

Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473℉~ 509℉ )，

Heated Bed Temp: 80°C - 100 °C (176℉~ 212℉)/ PVP stick helps

Printing Speed:30~70 mm/s (1,800~4,200mm/ min)

Fan: Low for better surface quality; Off for better strength

Raft

Filaments Diameter and Accuracy: 1.75 mm +/- 0.05

Filaments Net Weight: 1 kg (2.2 lbs)

Packaging Included:

1 × spool of ABS filaments