Specification:
Item Type: Gripper Pneumatic Cylinder
Material: Aluminum Alloy
Model: MHZ2-16D
Bore Diameter: Approx. 16mm / 0.63in
Working Pressure: 0.1-0.7MPa
Airs Inlet Thread: M5-0.8
Claw Distance When Closed: Approx. 14.9mm / 0.59in (There is an error of ±0.3mm in manual measurement)
Claw Distance When Opening: Approx. 20.9mm / 0.82in (There is an error of ±0.3mm in manual measurement)
Stroke: Approx. 6mm / 0.24in
Outer Diameter Clamping Force: 34N
Inner Diameter Clamping Force: 45N
Environment and Fluid Temperature: -10~60℃
Repeatability: Approx. ±0.01mm / 0.0004in
Maximum Frequency: 180c.p.m
Give Oil: Not Needed
Liquid: Airs
Action Type: Double Action

Package List:
1 x Finger Cylinder

Note:
1. In strong magnetic environment, use a switch cylinder with strong magnetic field resistance;
2. When there is a lot of dust, water droplets or oil droplets, a telescopic protective sleeve should be used on the cylinder rod side;
3. In environment with iron powder and iron filings nearby, if is not protected, the magnet will attract the iron powder and iron filings to gather around, which will weaken the magnetic force in the cylinder, which may cause the magnetic switch to fail;
4. In the high and low temperature environment, the cylinder sealing ring should be high temperature resistant or low temperature resistant sealing ring.
5. The distance between the cylinder barrels of the two parallel cylinders must be greater than 40mm, otherwise the magnetic switches of the two cylinders will be interfered with each other and cause malfunction.