Search

Search

1/2" Natural Gas Pressure Regulator Fit for Natural Gas and Liquefied Gas, Brass Interchange Pressure Regulator for NG 4" WC Out and LPG 10" WC Out, 1/2" NPT Thread

KWD 9
Brand
PNYZIK
Category
Fittings
Weight
289 g
– 1 +

Special Features

  • Specifications: Valve inlet and outlet are both 1/2" FPT pipe thread. Outlet pressure is 4-10" water column. Regulator is 1/2" NPT thread for 1/2" rod pipe. Conversion adapter sizes are: 1/2" male NPT x 1/2" male NPT, 1/2" male NPT x 3/8" male flare
  • Two Adjustment Modes: Manually switch between the two modes. Natural gas regulator mode, inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kpa(4"w.c), flow rate is 50L/min. LPG regulator mode, inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55Kpa(10"w.c), flow rate is 30L/min. Whether regulating natural gas or liquefied gas, this product is the perfect choice
  • Stable Performance: The pressure regulator helps to accurately control the flow and pressure of natural gas, and at the same time enables some machines that cannot be directly connected to natural gas to be connected. Effectively prevents gas waste and provides excellent performance and efficiency
  • Durable and Safe: The interchange pressure regulator is made of high-quality materials, which are more durable and anti-corrosion and anti-rust. Rated operating temperature is 32°F-225°F (0°C-107°C), do not use the product in high/low temperature conditions, the temperature will affect the resistance of spring resistance inside the regulator
  • Application Range: 1/2” FPT pipe thread is compatible with most kitchen Kitchen appliances, easy to switch the regulation of natural gas and liquefied gas. It is your reliable choice for residential cooking and commercial appliances. Please check and check whether it is consistent according to our standard data

Description

1/2" Natural Gas Pressure Regulator

Specifications:
Valve inlet and outlet: 1/2" FPT pipe thread
Outlet pressure: 4-10" water column
Regulator is 1/2" NPT thread for 1/2" rod pipe
Conversion Adapter Sizes: 1/2" male NPT x 1/2" male NPT, 1/2" male NPT x 3/8" male flare

Two Adjustment Modes:
Natural Gas Regulator Mode:
Inlet Pressure: 1.74Kpa(7"w.c)
Outlet Pressure: 0.95~1.05 kpa(4"w.c)
Flow Rate: 50L/min
LPG Regulator Mode:
Inlet Pressure: 2.74Kpa(11"w.c)
Outlet Pressure: 2.45~2.55Kpa(10"w.c)
Flow Rate: 30L/min

Installation Steps:
1. Install the adapter on the regulator, apply pipe joint compound glue to the interface, and tighten it with a wrench
2. Apply pipe joint compound glue to the manifold as well, and screw the regulator on (note that the arrow on the pipe must be pointing toward the grill)
3. Connect the gas supply line to the adapter and tighten, but do not overtighten
4. Open the gas shut-off valve and test for gas leaks with liquid. If bubbles are generated, it proves that the airtightness is not good
5. It can be used after checking

Application Range:
This pressure regulator fit for natural gas grills, heater, oven, gas welding equipment

cPackage Contains:
1 x Natural Gas Pressure Regulator
2 x Adapters
After-Sales Service:
If you have any problems or questions about our products, we will provide you with technical support until the problem is solved

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}