Search

Search

Swpeet 12Pcs M4 x 20 Jack Nuts Petal Nuts Expansion Nut Thins Fixings Dowels with Screws Assembly for Hollow Wall Iron Skin Line Use in Thin Soft Wall (M4 x 20)

KWD 3.500
Brand
Swpeet
Category
Fasteners
Weight
59 g
SizeM4 x 20
– 1 +

Special Features

  • 🥇 What You Get -------- In this kit, You will get 12Pcs M4 Jack Nuts Petal Nuts Assortment Kit, So many quantities that can meet all your daily needs.High quality Zinc Plated Steel, plating zinc, Can resist the corrosion and rust in marine environments.
  • 🥇 Easy To Use -------- 1. Drill a hole to the recommended diameter. 2. Tap the anchor into the hole until it is flush with the surface of the substrate. 3. Attach the setting tool to the head of the screw.Squeeze the to expand the anchor.(Small sizes may be set using a screwdriver) 4. Remove the screw and place it through the fixture then back into the anchor. Tighten the screw until the fixture is fixed.
  • 🥇 Fast Installation with Manual or Pneumatic Tools -------- The tool makes it easier. You can you 2 wrenched or pliers. One to hold the rivet nut so it does not spin after you insert it into the hole. Thread the right size screw into the nut. Tighten the nut with the other wrench/plier. As you tighten the screw/bolt, the nut will crimp and hold in place. Don't over tighten or you may strip the thread.
  • 🥇 Jack Nuts with Screws for Anything Really -------- Used these jack nuts to replace missing lower third bolt hole on a squarebody side mirror. Works and collapsed perfectly. The do seem to be in the light strength side however for a mirror use etc would highly recommend it.
  • 🥇 Warm Notice -------- Just need to select the appropriate tip and not install the guide so as to allow you to get closer to the jack nut flange. Again these are light weight use have not had the need to put something heavy one them either.

Description

💯 Swpeet 12Pcs M4 Jack Nuts Petal Nuts Expansion Nut Thins Fixings Dowels with Screws Assembly for Hollow Wall Iron Skin Line Use in Thin Soft Wall (Assortment Kit)

💯 WHY CHOOSE US?
💥 1, Will not distort or deform soft plastics or thin sheet metal
🥇 The sheet metal had holes that were stripped. Used these nuts and they worked perfectly. The brace is installed, and the upper part of the door is also stronger.

💥 2, Full assortment also includes Expansion Nut & Screws for installation.
🥇 In this set, we also provide matching screws for you to buy with confidence.

💥 3, Parts made of high-strength steel. Zinc finish for improved corrosion resistance.
🥇 High quality carbon steel with high hardness. zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical.

💯 Specification:
💫 Nut Type: Jack Nuts
💫 Nut Sizes: M4 M5 M6
💫 Total Length: 22.7mm/28mm/29mm
💫 Screws external diameter:12mm/14mm/16mm
💫 Material: Zinc Plated

💯 Package Included:

🌸 M4 Jack Nuts -------------------------- 12Pcs
🌸 Intotal 12Pcs

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}