Search

Search

HORTIPOTS 1/2 Inch Top Hat Grommet Pack of 25, Grommet Rubber Inside Diameter 12mm-13mm ID Using with 1/2 Inch OD Rubber Vinyl Tubing (25 Pieces/Pack)

KWD 6
Brand
HORTIPOTS
Category
Grommets
Weight
454 g
Size1/2 Inch Fittings (13mm)
– 1 +

Special Features

  • TOPHAT rubber grommets to replace worn old ones in existing DIY hydroponic systems, dutch buckets, dripping and irrigation systems to ensure water tight seals in your systems.
  • TOP HAT Grommets have a straight side wall for easy installation. When you insert the fitting into the grommet, the wall is pushed against the drilled hole to create water seal.
  • 19mm-20mm ID Holesaw 22mm. These 3/4 inch Top Hat Grommets are using with Outer Diameter 3/4 inch barked Connectors in hydroponic system
  • Sizes are 1/4 inch, 1/2 inch, 3/4 inch, and 1 inch by HortiPots
  • If you have any questions about top hat grommets, please feel free to ask us, thank you

Description

HortiPots Tophat Grommets available at 1/4 inch, 1/2 inch, 3/4 inch, and 1 inch.
The sizes of 1/4 inch, 1/2 inch, 3/4 inch, and 1 inch mean the Outer Diameters of Vinyl or Rubber Tubing that you are going to use to go through the hole of Tophat Grommets.
Drill the right size hole on the reservoir and push rubber grommet in; then, insert the pipe or connectors.

Be sure grommet's groove is fully inserted into the drilled hole.

If you have trouble with connection, please use soap or oil on the Barbed Elbow, Barbed Tee, Barbed Straight, Barbed Y Connector or PVC pipe to slide through drilled hole on the bucket or tank easier.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}