Search

Search

Traffic Light Controller Compatible with Sequencer AC Voltage Solid Sate Relay SSR 100V-240VAC 50HZ-60HZ 3 Channel RED Green Yellow RYG Built-in Indicator

KWD 16.500
– 1 +

Special Features

  • 🚦 This device requires basic ARDUINO programming knowledge. THE IDEAL UNIVERSAL TRAFFIC LIGHT CONTROLLER. Wide input AC voltage range 100-240VAC / 50HZ 60HZ
  • 🚦Min output load 5W and max 500W per channel. Independent outputs channels for operating LEDs or incandescent lamps. It can be used as 3 Channel or 2 Channel for RAILROADS or 1 Channel depends on your application.
  • 🚦NOT for fluorescent bulbs!!!. You are not limited to control only Lights. You can control any orther devices run Direct AC Line. AC pumps, AC fans, AC Outlets, Cookers, toaster
  • 🚦 Deisgn Your modes your self. You can use this in REAL traffic Lights
  • 🚦 Development Board with Microcontroller for AC Voltage. With this board everything is on your imagination. You can control almost all devices runs by AC Volt. You just need program it via computer. Remember you need to know basic programming language.

Description

USER NEEDS TO KNOW BASIC PROGRAMMING LANGUAGE
ALL MANUALS IN DESCRIPTION AND PRODUCT BULLTES AREA. PLEASE SEE LINKS BEFORE YOU BUY
3CH Traffic Light Controller, programmable board ARDUINO BASED
Our Traffic Light Controller is the perfect solution for all of your traffic signal needs. Accepting standard 120VAC and 240VAC line voltage, this controller provides 500 Watts per channel and will drive full-sized LED and incandescent traffic lights (this includes all household incandescent and LED bulbs). This board is based with the latest solid state relays. Solid state relays technology means quiet, effortless switching for many years.
Now is very simple programming all traffic lights timings with arduino software. USB-UART bridge is based on popular CH340G chip. This board is already programmed with simple traffic lights demo code. Also, all others demo codes are provided below.
What need user to start working with this board?
1.Download and install CH340G USB driver
2.Download and install arduino programming software from webpage
3.Connect device to the computer via usb cable
4.And upload demo or user written sketches to the board

Device specification:
PCB board dimension – 70mm x 100mm , color green
PCB Board Material - 1.6 mm FR-4, with solder mask & silk screen
Input Connector - 14-26AWG, 250VAC @ 16A screw terminals
Output Connectors - 14-26AWG, 250VAC @ 16A screw terminals
Safety fuse - 8A

For more information/resources, please contact with us via amazon messaging system.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}