【FILAMENT DRYER & STORAGE BOX】the filament dryer Cyclopes is specifically made for the purpose of drying 3D printer filament, aimed at removing the moisture that filament absorb from ambient exposing. Drying while printing, the dryer function as both storage box and filament holder (Note: you will need manually rotate the rolls for drying when NOT printing to avoid the direct hot air from the bottom)
【REAL-TIME HUMIDITY MONITOR & ADJUSTABLE TEMPERATURE】 a dramatic drop in the humidity level clearly indicated by the real-time humidity monitor, (NOTE: the dryer came with a A76/LR44 button battery, just switch the ON/OFF button on the back of hygrometer before using), measurement range from 10%-99%. Heating temperature can be adjusted to meet needs of various filaments, the setting temp will be displayed by the LCD panel. The default time is 6hrs, you can also reset from 0-24hrs up to 70℃ or even infinite heating time regarding your needs
【MULTIPLE EXIT HOLES & COMPATIBLE WITH MULTIPLE SPOOLS】Cyclopes works for a wide range of filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, ABS, Silk, Carbon fiber, Wood, etc. Teflon tube included, 10 exits holes are available for you to choose from. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of large filament(≥2kgs) at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture (Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)
【BUILT-IN FAN & 100W PTC HEATER】 a built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture, different from applying normal heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly
【RESTORE YOUR BRITTLE FILAMENT】keep your old left out brittle filament before having our filament dryer, Cyclopes will help drying and restoring the spools, even make them better than the brand new unit, impeccable prints are the result. No adhesion, cloggings, bubbles, or any plastic strings. Easy to use, no need extra set up
(2 Pack) 50 Watt 25 Ohm Wirewound Resistor Aluminum Case Chassis Mount 50W 25 Ohm Wire Wound Resistor Electrical Install Parts, Electrical Resistor Kit
KWD 4
-18%
【EIBOS Official】3D Printer Filament Dryer Easdry Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, ABS
KWD 23
IdeaFormer Filament Welder Connector,Filament Joiner,Connecting Broken 3D Printer Filament,Filament Sensor,3D Printer Tool for Most Kind of 1.75mm Filament,3D Printer Accessories(Black) (Black)
KWD 4.500
Silk PLA Shiny Cyan Blue PLA Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS Spool Silky Shiny Metallic Cyan Metal Gold Silver Copper Turquoise Blue PLA 3D Printing Material CC3D Silk Enamel Blue PLA
KWD 8
