Search

Search

-22%

U.S. Solid 3/4" Brass Electric Solenoid Valve 24VDC N.C. Air Non-potable Water Fuel VITON

KWD 14
Brand
U.S. Solid
Category
Fittings
Weight
0.7 kg
Size0.75 Inch
Material TypeBrass
– 1 +

Special Features

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
  • This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.

Description

The USS2-00061 solenoid valve is a direct and de-energized solenoid valve, with an internal wire inlet with G 3/4" seal and Viton (heat and oil resistant). Suitable for hot or cold water, oils, very low viscous liquids (
Customers chose this all-purpose valve for additional gas containers, sprinkler systems and much more. This solenoid valve should not be used continuously for more than eight hours. It can lead to overheating of the valve.

Specification
Model: USS2-00061
Body Material: Brass
Thread size: G 3/4" female inner
Hole: 20 mm.
Type: Normally Closed "NC", Direct Solenoid Valve
Oil seal material: Viton
Rated voltage: 24 V DC, ± 10%.
Rated power: 20 W
Current: 0.833 A
Protection class: IP65.
Operating pressure: 0 - 7 bar (0 - 101 psi) (For Water, Air, Gas); 0-5 bar (0 - 72 psi) (for Oil)
Operating temperature: -10°C to +120°C
Flow rate: 7.6 gallon per minute (GPM) of water at 60℉ with a pressure drop of 1 psi (7.6 HP).
Quality assurance: CE certified
OVERHEATING WARNING
Not designed for continuous operation (not a 100% work cycle). Under normal operating conditions, the solenoid valve will be HOT when powered on. The coil will reach a maximum temperature of about 80°C. It fully complies with the national standard: JB/T7352-2010. If it is continuously powered for more than 8 hours, the coil may burn.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}