Search

Search

Hose Clamp Fasteners Only, All 304 Stainless Steel Screw Worm Clamp Fasteners for DIY Large Adjustable Worm Drive Hose Clamp Kit Metal Strapping, 10 Pack

KWD 4.500
Brand
Steelsoft
Category
Fittings
Weight
190 g
– 1 +

Special Features

  • Stronger: Our hose clamp fasteners are constructed with thick stainless sheet, solid shell joint and big screws. The entire mechanism provide higher clamping force and torque strength than other thin buckle in the market.
  • Non-Stripping: The min.ultimate torque of our worm clamp fasteners is 60 lb-in. It will not strip out when you tighten the hose clamp. This is important to ensure your clamping solid. The screw threads grip the metal straps tightly.
  • Smooth Worm Gear: The free torque of our clamp fasteners was set in a suitable level to keep smooth worm drive when you use a slotted screwdriver or nut driver, no need to apply hard pressure and prevent metal grinding.
  • All 304 SS: Our metal clamp fasteners are all made of 304 stainless steel, NOT 201 SS. With good performance of corrosion resistance, they are very suitable for outdoor use, and keep the worm gear hose clamps reusable!
  • Super Easy To Use: In the package, you can please read the directions of how to make a diy clamp. The hex size is 5/16 inch so you can use either nut driver or slotted screwdriver to get the worm drive hose clamp tight.
  • Box Included: 10 PCS worm fasteners (without strap roll) + 1 installation directions
  • More strap with hose clamp worm gear fasteners, please find them in our Amazon store.

Description

STEELSOFT 304 stainless steel clamp fasteners are worked as a buckle to connect the cut metal straps and make a diy hose clamp.
Our worm gear fasteners are compatible with the most hose clamp strap in the market.
The included instructions are clear to guide you to make your own hose clamp very fast.
Due to the thick steel and solid joint, our worm fasteners provide the higher clamping force and torque strength.

-Specifications-
1.Material: 304 stainless steel
2.Fastener Quantity: 10 PCS
3.Steel Sheet Thickness: 0.04"
4.L x W x H: 1-3/4" x 5/8" x 1/2"
5.Screw Hex Size: 5/16 inch
6.Min.Ultimate Torque: 60 lb-in
7.Recommended Installation Torque: 65-70%

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}