Size: 3/8" Tube OD
Material:Nickel Plated Brass
Working Temperature: 32～140°F
Fluid Admitted: Air
Max Working Pressure: 0~145Psi
Applicable: Pipe PU/PA/FEP/PFA

installation method:
1 .After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
2 .After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
3.When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
4.After installation, you just need to rotate the joint body to adjust the direction of the pipe.