Fixed Couplers are used to Connect Stepper Servo AC DC motors to Ball screw or Lead screw they are widely used to build CNC Router, CNC Plasma, CNC Mill and many automation machines.Use 4 screws per coupler, two on each side
Widely used in hardware,molds, and the occasion of the mechanical transmission.
25" shaft connector with 6mm bore. Before buying a selector, measure your motor shaft with a digital caliper.
The outer diameter of the coupler is approximately 3/8".Whether to use 4 screws per coupler, two on each side
The material of the product is aluminum, which can accept high heat
-42%
Climax Metals ISCC-062-050 Black Oxide Plated Mild Steel Clamping Coupling, 5/8" x 1/2" Bore, 1-5/16" Outside Diameter, 2" Length, #10-32 x 1/2" Clamp Screw
KWD 14
2pcs 7 x 7mm Motor Shaft Rigid Brass Sleeve Coupling Connector + Tighten Screws
KWD 3.500
Bonsicoky 4 Pcs 6mm Rigid Flange Coupling, High Hardness Metal Axis Bearing Fittings Motor Connector, Guide Shaft Support Coupler for DIY RC Model
KWD 3.500
2pcs Double Split Shaft Collar for 6mm Shaft Set Screw Clamp-On Collars, 20mm OD, 8mm Width, for Stoppers, Position, Hold Timing Pulleys, Machine Tools, Industry, Anodization
KWD 3
