This module realizes the complete isolation of communication between the master control terminal and the controlled terminal. It is suitable for use in low-power applications. If you want to increase the output power, you need to cut off the power supply short-circuit block on the back and weld the external power supply for power supply (input power supply). The voltage needs to be less than 5.5V)
With input anti-reverse connection function, output short-circuit protection function, with output power indicator light
Applicable communication interface: UART, SPI communication, single-wire communication (not applicable to IIC communication)
The hole spacing of the board is 0.1”, suitable for mounting on a breadboard
Recommended data transmission speed: ≤ 50Mbps (theoretical maximum speed 150Mbps)
Description
Specification:
Input voltage range: 4.5V~5.5V
Output current: Iout ≤ 200mA
IC isolation voltage: 5KV
Power isolation voltage: 1.5KV
Power conversion efficiency: 88% MAX
No-load ripple: Vpp(out) ≤ 15mV @Iout = 0 mA
Working temperature: -40℃ ~ +85℃
Size: 3.6*2.5cm (1.41*0.98in)
for Teclast P20HD Touch Screen Digitizer for Teclast P20HD 10.1 inch Screen Replacement Glass Panel with Repair Kit (not LCD Display)
KWD 6.500
-23%
Nemco 47217-1 Thermostat, Short, 120V, 9" Height, 6" Width, 5" Length
KWD 32
Household AC Contactor, HSR1-25, 2 Pole, Two Normally Closed, 220V/230V Coil Voltage, 35mm DIN Rail Mount
KWD 4
uxcell ASH-150DA 3-32VDC to 24-480VAC 150A Single Phase Solid State Relay DC to AC Relay
KWD 9
