24V Digital LED Temperature Controller Thermostat Control Switch NTC 10K Probe

Features:
1. LED Indicator Light: The bright digital tube is clearly displayed, and it can be clearly read whether it is used during the day or at night.
2. The sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will.
3. Not only exquisite and beautiful, but also 1.8mm ultra-thick design, high mechanical strength, good electrical performance.
4. Wiring input and output design, more convenient to use in various industrial equipment, multi-strand wire 300V/20A over-configuration, safe and reliable
5. High cost performance, Stainless steel shell, resin seal treatment, waterproof. Our probe is designed to be electrically isolated, so you can use it safely

Specification:
Name: Microcomputer Temperature Controller
Model: XH-W3001
Temperature Measurement and control Range: -50 to 110 degree centigrade
Measurement Accuracy: +/- 0.2 degree centigrade
Control Accuracy: +/- 0.1 degree centigrade
Measuring input: NTC 10K L = 1M waterproof probe
Output Type: Direct output (input/output synchronization)
Output Current: 10A (MAX)
Installation Pitch: 73mm/2.87'' (aperture 4mm/0.15in)
Appearance size: 60 x 45 x 31 mm/2.36 x 1.77 x 1.22 in
Item Weight: 50g / 1.6oz

How to use
1: Press "UP" button show the starting temperature;
2: Long press "UP" button until the temperature display flashes, press the "UP" or "Down" button to set the start temperature value;
3: Press "Down" button show the stop temperature;
4: Long press "Down" button until the temperature display flashes, press the "UP" or "Down" button to set the stop temperature value.

Package including:
2 x W3001 Digital Thermostat Module
2 x Temperature probe sensor