【Solid Brass】The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy 90°elbow shaped brass barbs and thickened wall, higher strength and very rugged.
【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the pipe with appropriate size at the end. No doubt, it is easy to operate.
【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
【Solid Connection】The hose barb fittings can be solid connected to the hose (Fit hose which ID of 10mm). Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
2PCS 1/8" NPT Female Thread Brass Bulkhead Coupler 5/8" Outer Diameter Water Tank Connector Thru-bulk Coupling Pipe Fitting
KWD 5
-10%
Solid Brass 1/2 Inch Horizontal Swing Check Valve 1/2" Female Thread Non-return One-Way Prevent Water Back-flow
KWD 4.500
Uenede Solid Brass 3-Port Air Compressor Check Valve M10*1 x G3/8" x G1/2" Male Female Threaded Tube Connector Non-Return Valve
KWD 5
Uenede Solid Brass 3-Port Air Compressor Check Valve G1/8" x G3/8" x G1/2" Male Threaded Tube Connector Non-Return Valve
KWD 4.500
