Color:Marble
Brand:HZST3D
Material:PETG
Net Weight:1KG
Technical specification:
Outside Diameter: 1.75 millimeters
Tolerance: +/-0.05mm
Extruder recommend temperature: 250-265°C.
Heat bed temperature:70-85°C
Recommended print speed: 30-60 mm/s

Tips for use and storage:
1.Please note that: Nozzle >0.4mm, it is recommended to use 0.6mm nozzle.
2.. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
3. In order to extend the life of your filament, please store it in a dry, sealed bag or box. Preferably, add a packet of Silca Gel to absorb any excess moisture.
4. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.