***IMPORTANT: These self fusing tape are completely non-sticky themselves. they fuse to themselves after applying pressure. Remove the isolation layer, then place the tape on the problem area, hold firmly and stretch (WITH TENSION) around the object and wrap over itself to fuse. ***

Instructions:
1 ) Dry the substrate before applying the tape. Place the tape on the problem area, hold firmly and stretch (WITH TENSION) around the object.
2 ) Continue to stretch the tape, overlapping each layer by 1/2" and wrap over itself to fuse.
3 ) Wrap completely over the problem area and cut the tape once finished. Press the end firmly into place.
4 ) To remove, carefully cut with scissors or knife.

Applications:
Plumbing repairs
Garden hoses & tubing
Outdoor antenna coax connector weather sealing
Electrical cable repair & insulation
Outdoor extension cord & lighting connector protection
Automotive & RV hose repairs
Marine applications
Tools, sporting good & handlebar grips

Specifications:
Color: Black
Thickness: 30 mil
Width: 1 inches
Length: 10 feet x 6 rolls
Operating Temperature Range: -10C to 100C (14F to 212F)
Specific gravity: 1.20 ± 0.03
Shore a durometer hardness (room cured - 24 hours): 55 ± 5
Tensile strength: 700 psi min
Elongation: 300% min
Tear strength: 60 ppi min
Bond strength 2 lbs. min
Cold brittle point: -54C (-65F)
Water absorption (by weight): 5% max
Dielectric strength: 400Vpm min
Dielectric constant, 1kH3: 2.95
Dissipation factor, 1kH3: