Search

Search

BIGTREETECH 5 inch HDMI Touch Screen Display 800x480, IPS 160° View Angle Monitor Compatible with Sovol-SV08 Raspberry-Pi 4B, 3B, Banana Pi, Windows 10 8 7

KWD 15.500
KWD 19
StyleHDMI 5
– 1 +

Special Features

  • 【Upgrade Printing Speed and Quality】PAD 7 upgrade and pre installed Klipper firmware, using Klipper's input shaper and BTT ADXL345 module, can effectively improve printing speed while ensuring printing quality, printing speed can be increased by 2 to 5x compared to Marlin firmware; You can improve the printing quality and speed to new heights and achieve the best model quality possible.
  • 【Supports Open Source】Based on the DIY innovation needs of makers, PAD 7 allows users to freely change the PAD firmware system and other Klipper firmware, and can easily replace the PAD firmware system through SD card or USB. Meet the customized needs of users for Klipper.
  • 【Wide Application Range】If you use CoreXY 3D printers such as VORON 2.4 or VZ Bot, you can pair them with the PAD 7 + BTT Octopus series control board; If you use i3 3D printers such as Ender-3/BIQU B1 SE Plus, you can pair them with the PAD 7 + BTT SKR series control board; If you use Raspberry Pi Ecology, you can remove the CB1 core board and replace it with CM4 to use Raspberry Pi OS, which can achieve video watching and internet access (Can externally connect keyboard and mouse).
  • 【Rich Connectivity】PAD 7 reserves rich expansion interfaces to make it suitable for a variety of projects and applications. USB2.0*3; USB-C*1: Dial switch selects UART/OTG mode, supports 5V3A power supply; Audio Out*1: 3.5mm; TF card slot*1: 32GB; CANbus*1: MCP2515 SPI to CAN; RJ45*1: CB1 supports 100Mbps, CM4 supports 1000Mbps; SPI*1: Connected to ADXL345; ❗Note: It is not possible to use CAN interface and ADXL345 accelerometer SPI interface simultaneously due to MCP2515 SPI to CAN conversion.
  • 【Attack Amplifier】Two sided speakers with adjustable volume buttons (physical adjustment keys need to be supported by the corresponding operating system to be used, currently available in the Klipper mode of CB1, and the desktop system in CM4 mode is pending). It can provide a stereo amplifier for Pad7 when replacing CM4 with a Linux desktop system, and a 3.5mm interface can be connected to headphones to achieve a multimedia experience on a desktop computer.

Description

1. Product Parameters:
1.1 Product Dimension: 121 x 76mm
1.2 Power Input: DC 5V
1.3 Logic Voltage: DC 3.3V
1.4 Screen Size: 5-inch IPS Display
1.5 Screen Resolution: 800x480
1.6 Screen Viewing Angle: 160°

2. Indicator Light:
When the motherboard is powered on:
The power indicator, D6 red light, lights up, indicating that the power supply is functioning normally.
The working status indicator, D7 green light, flashes, indicating that the screen is working normally.

3. Product Functions:
3.1 Connecting to the Display Output Device:
3.1.1 Use the Type C data cable to connect the HDMI5 to the display output device (compatible with Sovol-SV08 3d printer/Raspberry-Pi/PC/other devices that support HDMI display output). When connecting to the PC, the PC will automatically load the driver under normal circumstances. After the driver is loaded, the touch device can be recognized.
3.1.2 Use the HDMI cable to connect HDMI5 to the display output device. Usually, after connecting the HDMI cable, the LCD can be displayed normally within 5 seconds.

3.2 Audio Out:
Plug the 3.5mm earphone/speaker into the AUDIO interface to realize audio output.

3.3 Screen Brightness Adjustment:
BIGTREETECH HDMI5 V1.0 supports brightness adjustment, you can increase the brightness via the Ks1 button, and decrease the brightness via the Ks3 button.

3.4 Display Direction Adjustment:
BIGTREETECH HDMI5 V1.0 supports horizontal display direction adjustment via the Ks2 button.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}