Search

Search

Ximimark 1Pcs SHT31 SHT31-D Temperature Humidity Sensor Module Breakout Weather for Arduino

KWD 4
Brand
Ximimark
Weight
45 g
– 1 +

Special Features

  • The temperature/humidity sensor is the finest and highest precision equipment you can get. For most applications, the SHT31-D sensor has an excellent relative humidity of ±2% and an accuracy of ±0.3°C.
  • Features include enhanced signal processing, two unique user-selectable I2C addresses and communication speeds up to 1 MHz.
  • The wide supply voltage range of 2.4 V to 5.5 V ensures compatibility with a wide range of assembly conditions. So you can use any microcontroller or microcomputer to power and communicate.
  • Such a lovely chip - so we spun up a breakout board with the SHT31-D and some supporting circuitry such as pullup resistors and capacitors.
  • Each order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB but it's fairly easy and takes only a few minutes even for a beginner.

Description

Power Pins:
Vin - this is the power pin. The chip can use 2.5-5VDC for power. To power the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like Arduino, use 5V. For a 3.3V controller like a Raspbery Pi, connect to 3.3V
GND - common ground for power and logic

I2C Logic pins:
SCL - I2C clock pin, connect to your microcontrollers I2C clock line. This pin has a 10K pullup resistor to Vin
SDA - I2C data pin, connect to your microcontrollers I2C data line. This pin has a 10K pullup resistor to Vin

Other Pins:
ADR - This is the I2C address selection pin. This pin has a 10K pull down resistor to make the default I2C address 0x44. You can tie this pin to Vin to make the address 0x45
RST - Hardware reset pint. Has a 10K pullup on it to make the chip active by default. Connect to ground to do a hardware reset!
ALR - Alert/Interrupt output. You can set up the sensor to alert you when an event has occured.

Note:
The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 1Pcs

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}