Size: Diameter: 1/4" and Tolerance:+0.0008"/-0.0008";Height: 1/2" and Tolerance:+0.02"/-0.02";Finish Type:Vibration Polishing.
Material: These cylindrical pins are made of heat-treated high alloy steel, very smooth surface, anti-rust, anti-corrosion, strong and durable for long using life.
Easy to install: This cylindrical locating pin has special on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase.
Application: Mainly used for metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application
Notice: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 1/4")
-14%
uxcell Hardware Nails Carbon Steel Point Tip Wall Cement Nail 20mm(0.8") 3mm Rod Dia Silver Tone 100pcs
KWD 3
uxcell Square Nuts, M3x6mmx2mm Zinc-Plated Metric Coarse Thread Assortment Kit, 25 Pcs
KWD 3
-11%
uxcell M3 x 60mm 0.5mm Pitch 304 Stainless Steel Fully Threaded Rods Fasteners 20 Pcs
KWD 4
uxcell 4#-40 5+8mm F/M Brass Hex Standoff Spacer Screws PCB Nickel Plated 100 Pcs
KWD 4.500
