Model: JP550T Features & Benefits Every pump is 100% factory tested 3 year warranty Factory certified performance curve included Rated for continuous duty Rugged cast iron construction maximizes pump life Piggy-back tethered float for automatic or manual operation Non-clogging vortex impeller passes 2 in. solids High efficiency permanent split capacitor motor with automatic reset thermal overload protection Ball bearings for quiet operation 10 ft. power cord Carbon and ceramic sealed motor for long life Specifications: Construction Materials Motor Cover: Cast Iron Volute: Cast Iron Motor Horsepower: 1/2 RPM: 3,450 Volt: 115 AC, 60 Hz Full Load Amps: 7.4 Type: Permanent Split Capacitor (PSC), oil cooled Insulation: Class B Rating: Continuous Duty Discharge Size: 2 in. Solids Handling: 2 in. Liquid Temperature (max.): 130 F (55 C) Hardware: Stainless Steel Impeller Type: Non-Clog Vortex Material: Impact Resistant Thermoplastic Bearing Type: Ball Shaft Seal: Carbon/Ceramic Power Cord: 10 ft. grounded three-prong, water-resistant, type SJTW-A/SJTW Switch: Piggy-back tethered mechanical float, 10 ft. cord Switch On Level: 15 in. Switch Off Level: 7.3 in. Shut Off Head: 18 ft. Maximum Flow: 108 GPM Minimum Sump Diameter: 18 in.