iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Sediment and Carbon Block Filters
The WGB32B whole house filtration system is the ideal ""point of entry"" filtration system for cleaning up water supplies to a home or business on municipal (city) water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB32B filters your water from the source. This means water from every output in your home or business will have passed through the three filtration stages of the WGB32B. So what exactly do these three stages of filtration offer? Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second and third stages of the WGB32B house 5-micron CTO coconut shell carbon block filters. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filters knock out bad tastes and odors, combine to remove over 90% of chlorine from the water, and are highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. If you are on well water or have unusual contaminants in your municipal water supply, you may want to consider the WGB32BM over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.

iSpring WSP-100 Reusable Whole House Spin Down Sediment Water Filter, 100 Micron Flushable Prefilter Filtration, 1" MNPT + 3/4" FNPT, Brass
The WSP-100 spin down sediment filter is ideal for filtering out course sediment larger than 100 Micron. The stainless steel screen makes the flushing and cleaning process very simple, allowing flushing of the contaminants through the bottom of the filter when the cartridge begins to get clogged. This allows the stainless steel filter cartridge to be used over and over again without needing to be replaced. The 1 inch outlet MNPT fitting provides a maximum 20 gpm flow rate, and the WSP-100 also features 3/4 inch NPT threads on the inlet and outlet. Specifications: mesh pore rating: 100 Micron dry weight: 1 lb. dimensions: 3. 5 inch width x 9 inch height suitable temperature range: 40 - 100 °F suitable pressure range: 20 - 90 psi