Specification:
Item Type: Water Pressure Booster Pump
Material: ABS, red copper
Working Voltage: 24V
Insulation Class: ClassH
Protection Class: IP56
Supercharging Effect: 65Pa
Noise: Low
Open Mode: Automatic water flow control
Flow: 15L/minute
Head: Approx. 18m / 59.1ft
Piping Inner Diameter: Approx. 15mm / 0.6in
Medium Temperature: 2-65℃

Package List:
1 x Water Pressure Booster Pump
1 x Power Adapter
1 x Water Pipe
1 x Instruction
1 x Hook

Note:
1. The water pump has a built‑in water flow switch valve. The minimum flow rate of 1.5L/min is required to open the valve to start the pump. If the water flow switch cannot be opened, the power supply must be disconnected again for 3 to 5 seconds and the water pump will be forced to start for 10 seconds. Power on and work for 10 seconds, it will automatically stop, indicating that the water flow switch valve is not open.
2. Test Method: Take a mineral water bottle and connect it. Generally, a mineral water bottle is a 500ml bottle, and about 3 bottles can be connected in one minute, which can be installed and used.