Specification:
Input Voltage: DC 12 - 40V
Power: 0.01 - 400W
Rated Current: 8A
Maximum Current: 10A
Standby Current: 0.02A
Frequency: 13KHz
PWM Duty Cycle: 10 - 100 Percent

Features:
- The governor is advanced in technology, high in efficiency, large in torque and low in heat, and has been widely used in industrial production.
- The circuit board uses military grade materials.
- Original 63V / 1000uF large capacitor, to ensure the stability of the module.
- The power MOSFET uses IRF3205, don't worry about not moving your motor(Parameter: Maximum leakage current 82A; The maximum voltage is 75V; Open resistance 0.013ohm).
- The terminal uses 8500 high current terminal with label 300V 20A.
- Equipped with 10A fuse, to prevent short-circuit high current, causing burnout protection.
- With reverse power protection, to prevent damage to the module when the power is reversed.
- Potentiometers are equipped with nuts, you can use without adding other components.
- Equipped with potentiometer.

Note:
- The input of DC motor governor is DC, and it cannot be directly connected to AC, otherwise it will be burnt out.
- Do not connect the positive and negative terminals of DC power supply reversely, otherwise the governor may be damaged.
- The motor can be either positive or negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
Package Include: 1 x PWM Governor