UR197 Switch:
These metal buttons are rugged and look really good while doing it! Simply drill a 19mm hole into any material and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure.

Pin + and Pin – are the genus LED light pins. There is no difference between anode and cathode. Pin C is Common, Pin NO is NORMAL OPEN, Pin NC is NORMAL CLOSED. Usually use NORMAL OPEN to control, press the button to breakover. Of course, you can also use NORMAL CLOSED to control, press the button to power off.

The UR197 switch is rated up to 5A/30VDC while the LED is rated for 15mA / 24VDC. As long as you don't exceed the rating amps and volts, it can run anything. If you want to use this with a higher voltage, simply add a resistor in series with the LED connection to keep the LED current at around 15mA.

Latching Switch:
Latching switch will latch into place, maintaining their state until pressed again latching back to where the started.
These latching buttons are perfect for Power Button Switch, Fog Lamps, Led Switch or any circuit controls. Also great for electronic DIY projects.

Note:
*The maximum current rating is only 5A. Don't exceed the rating amps, or the switch will get warm and to be burned out.
*These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water.

Features:
Thread depth: 16mm (5/8")
Drill hole diameter: Φ19mm (3/4")
Head diameter: 22mm (7/8")
Depth include contacts: 38mm (1.5")
Switch rating: 5A/250VAC, 5A/30VDC
LED rating: 15mA, AC/DC 24V
LED Color: Red
Switch contacts: 2NO2NC
Operation Type: Latching
Head shape: Flat (flush-button)
Body material: Stainless Steel
Protection level: IP67, IK10

Package Include:
1 X Push Button Switch
1 X Switch Connector