24V 2 in 1 Out Dual Color Hotend Extruder Brass Nozzle 0.4mm Print Head w/Silicone Sock Heater Thermistor Compatible with Ender 3 V2 /Ender 3 Pro Ender 5 / Pro/Plus /CR10S /CR10 S4 S5 3D Printer

Good heat dissipation and reduce blockage: Adopting a double-sided cooling scheme, the hollow design of the radiator allows the cooling fan to directly exhaust the heat from the throat, reducing the heat dissipation burden on the radiator body
Can connect two colors of filaments, switch between two connector inputs during printing, and extrude through the hot end for more accurate molding positioning.
Can Be Used both As Single Color Filament Printing and Dual Colors Filament Printing, But cannot used for mixed colors filaments printing
Heater: 24V 40W; Thermistor: NTC 100K 3950B; Operating temperature range： -40 ~ +250°C (-40 ~ +500 °F) as this hotend is using PTFE pass through heatbreak. If you wanna use it for higher temperature printing, please replace the heatbreak and thermistorto be all metal
package: 1 set installed Hotend

Compatible with Ender 3, Ender 3 V2, Ender 3 Pro , Ender 5, Ender 5 Pro, Ender-5 Plus /CR10S /CR10 S4 S5 3D Printer DIY Accessories

Hello,