TWO FINISHES: A must-have 3D Printer part for DIY or replace a new SnapmakerA350 A350T flex bed. This PEI build plate is Double-Sided, Smooth & Textured. The Smooth Side pre-applied a pei sheet leaves a glossy, reflective finish. The Textured-powder Side leaves a textured matte finish. Give you two different experience just by flipping it over.!!! Note: The plate is not completely flat due to its spring characteristics, it can be fully pulled and solved by the strong maglet of the sticker.
SIZE: 334x364mm/13.1x14.3inch, compatible with 3D printer SnapmakerA350, A350T,F350, Select-Mini V1 and V2 or other 3d printers with similar size heated bed, not rely on its printing area. Better to re-measure your print bed before ordering to avoid wrong buy.
!!!Kindly NOTE: NOT recommend printing ABS( or other high temperature filaments which need bed temp Over 80℃/176℉) on the Smooth PEI side to Avoid tearing off. You can print it on the Textured side. Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry.
EASY TO INSTALL: This PEI build plate is very easy to use. Simply stick the soft sticker sheet onto your heated bed and place the flexible PEI build plate platform on it. The sticker bottom holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the pei plate back onto the sticker sheet. Prints are removed easily without any scratches or damage.
High Quality: The removable flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface with strength when heated, easy to releases them effortlessly when cooled. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help.
Description
This is a customized pei build plate 334x364mm/13.1x14.3inch, Double-Sided Coating, Smooth & Textured, two different experience. Compatible with 3D printer SnapmakerA350 A350T F350, or other printers with similar size hot bed, not rely on the printing area. The size of heated bed is not equal to that of its printing. Please re-measure your printer bed before ordering to avoid wrong buy. Package includes 2 parts: 1* spring steel plate + 1* sticker sheet.
FYSETC Anycubi Photn Replacement Parts 42-48mm Stepper Motor with leadscrew 24cm/9.44inch, 1.5A 2 Phase 3.45V 1.8° Step Angle Compatible with 3D Printer Photn Mono 4K/ Mono X/ M3 Plus/Max-Pack of 1
KWD 12
FYSETC 3D Printing Replacement Part Extruder Transfer Adapter Plate Board Compatible with Mega-i3 Mega-S 3D Printer-2Pcs
KWD 5.500
FYSETC 3D Printer Prusa Mini Build Plate 2 in 1 Smooth PEI Spring Steel Sheet 196.3x190mm/ 7.7x7.4 inch Flexible Removable Hot Bed Cover with PEI Pre-Sticked for 3D Printing Filament PLA PETG
KWD 10
FYSETC 3D Printer Heated Bed Platform 200X200mm Flex Hot Bed Build Plate 2 in 1 with Adhesive Backing Build Surface for Make Select Plus V2 Prus i3 Vinci 1.0 Tarantul I3 Printer
KWD 5.500
