The USS2-000015 solenoid valve is a direct and de-energized solenoid valve, with an internal wire inlet with G 1/8" and NBR seal. Suitable for hot or cold water, oils, very low viscous liquids (
Customers chose this all-purpose valve for additional gas containers, sprinkler systems and much more. This solenoid valve should not be used continuously for more than eight hours. It can lead to overheating of the valve.

Specification
Model: USS2-00015
Body Material: Brass
Thread size: G 1/8" female inner
Hole: 2.5 mm.
Type: Normally Closed "NC", Direct Solenoid Valve
Oil seal material: NBR
Rated voltage: 12 V DC, ± 10%.
Rated power: 14 W
Current: 1.167 A
Protection class: IP65.
Operating pressure: 0 - 7 bar (0 - 101 psi) (For Water, Air, Gas); 0-5 bar (0 - 72 psi) (for Oil)
Operating temperature: -5°C to + 80°C.
Flow rate: 0.23 gallon per minute (GPM) of water at 60℉ with a pressure drop of 1 psi (0.23 HP).
OVERHEATING WARNING
Not designed for continuous operation (not a 100% work cycle). Under normal operating conditions, the solenoid valve will be HOT when powered on. The coil will reach a maximum temperature of about 80°C. It fully complies with the national standard: JB/T7352-2010. If it is continuously powered for more than 8 hours, the coil may burn.