Size:16mm Tube OD x 1/2" Thread
Material: Copper and Plastic
Shape: Straight
Working Pressure:0-1.0 Mpa | 0-145 Psi
Fluid Type: Air
Working Temperature: 0-60°C | 32～140°F
Applicable Tube:PU / PA / PE / PVC
installation method:
1 . After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
2 . After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
3. When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
4. After installation, you just need to rotate the joint body to adjust the direction of the pipe.