Variable Frequency Drive: AC 220V/0.75KW 1HP 4A CNC VFD Single Phase to 3 Phase Converter for Spindle Motor Speed Control(Single Phase Input, 3 Phase Output) Black

Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-3200 Hz; Input phase: 1 phase; Output phase: 3 phase.1HP 4A.
Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Production Lines, Processing Equipments, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor, etc.
Features: (1)V/F control. (2)With RS485 communication port, using MODBUS RTU protocol. (3)DC cooling fan with low noise, large air volume. Low noise, low electromagnetic interference. (4)Built-in: 8-speed control, simple PLC, PID. (5)Timing operation function. (6)Supported multiple commands.
The VFD machine is screwed to ensure the stability and reliability of the use, or installed on the rail with ABS flame retardant shell.The triple-proof paint is to improve and extend the life of the fuselage.Built-in chip, provides overload, overheat,Input output phase loss, over/under voltage protection.
Using Note: ▲Altitude: Less than 1000m above sea level(when higher than 1,000m, every 100 m rise, 1 % reduction). ▲Temperature: -10 ℃ ~ +40 ℃ (when in 40 ℃ ~ 50 ℃, please reduce the amount of use). ▲Humidity: less than 95 % RH. ▲Vibration: less than 5.9 m / s². ▲Storage Temperature:-40 ℃ ~ +60 ℃.

Hello,