Specification:
Baud Rate:38400
Power Source:24VDC
Input power DC 24V Number of steps 8000 steps; 2 communication ports: 1 RS232 (DB9 serial communication port is FX3u protocol 38400, 7, E, 1; 1 RS485 (485 option) (communication protocol can be set D8120) Input point X component XO-X27, DC24 input, active low. X0-5 is the high-speed counting input port (12KHZ) Input point Y component YO-Y3 is the transistor output, the transistor output current is 500mA, plus the freewheeling diode can reach 4A; YO-Y3 is 4 channel 100K pulse output, the output current is 500mA, plus the freewheeling diode can reach 4A.; Y4~Y11 is the transistor common output Can directly drive 24V3A load Analog input 6 analog inputs, 12-bit accuracy, (3 voltages 0-10V, 3 currents 0-20MA); read analog with RD3A instructions Analog output 2 analog outputs, 12-bit accuracy, output voltage: 0-10V. Output analog voltage with WR3A command Intermediate relay M MO-M3071, the power-down storage range can be set to MO-M1023, the default M500-M1023 Step point S S0-1023, the power-down storage range can be set to S0-S1023, the default S500-S9999 100Ms timer TO-T199, cumulative power-down save T184-T199 10Ms timer T200-T249, cumulative power-down save T246-T249 1Ms timer T250-T383, where T250-255 is cumulative 16-bit counter CO-C199, save power C100-199 32-bit counter C200-C219, save power C220-C234 32-bit high-speed counter C235-255; C235-240 is a single-phase counter, no multiplier; C241-240 is a single-phase counter, 2 times the frequency; C247-249 is a two-phase counter, no multiplier; C250-252 is a two-phase counter, 2 times Frequency; C253-255 is a two-phase counter, 4 times frequency Register D DO-D7999, the power-down storage range can be set to DO-7999. Indirect addressing pointer V, Z VO-7, Z0-7 P subroutine jump number PO-63 I interrupt XO-5 is interrupted outside. Timer interrupt (1MS is the unit).

Package List:
1 x PLC Controller