Specification:
Input Interface / Output Interface: 100A High Current Bite Screw Stud
Voltage measurement range: 0.00V ~ 200V, Resolution accuracy: 0.01V
Current measurement range: 0.00A ~ 20A, Resolution accuracy: 0.01A
Capacity accumulation range: 0 ~ 999.999Ah, Resolution accuracy: 0.01Ah
Power accumulation range: 0 ~ 9999.9Wh, Resolution accuracy: 0.01Wh
Power measurement range: 0000.00 ~ 150W, Resolution accuracy: 0.01W
Impedance measurement range: 1 ~ 999.9Ω, Resolution accuracy: 0.01 Ω
Temperature measurement range: 0 ~ 99 ℃, Resolution accuracy: 1 ℃
Timing maximum time: 999 hours 59 minutes 59 seconds, Resolution accuracy: 1 second
Timing measurement reminder settings: countdown 24 hours, any value can be set
Small current standby to remind the threshold parameters and timing: 0.5W begin timing
Power supply: 4 ~ 30V range of DC voltage
Refresh time: > 500mS / times
Measurement rate: about 0.5 times / sec
Over voltage Over current Set the alarm mode: Show alert interface to remind the user
Overpressure Reminder Setting range: 1 ~ 200V
Low voltage reminder setting range: 0 ~ 190V
Overflow Reminder Set Range: 0.2 ~ 100A
Display Type: Micro power LCD Module LCM Green Backlight Chinese & English Display
Operating temperature: -10 ~ +60 ℃
Interface: USB, 5.5mm jack, Mini USB, Micro USB, Type-C
Working humidity: 10 ~ 80
Working pressure: 80 ~ 106kPa
Plug type: US plug
Weight: 631g

Note:
1. Please turn down the knob to the end counterclockwise before using, and then turn up slowly.
2. Please pay attention to your safety when the voltage is more than 36V.
3. Several tested power supply can not be connected simultaneously.
4. The current adjustment knob should be regulated slowly.

Package Include:
1 x Fan
1 x USB Cable
2 x Crocodile Clip
1 x Power Plug Cable
1 x Manual