1/2" DC 12V Normally Closed Brass Electrical Solenoid Magnetic Water Valve for Water Heaters, Straight Drinking Machines, Water Purification Machines,Manual valve
HIGH QUALITY MATERIALS: this electric solenoid valve is a precise and reliable structure made of cast brass, with the characteristics of wear resistance, anti- and resistance to high temperatures.
MULTIFUNCTION: this solenoid valve can not only maintain the constant flow of constant current, but also prevent dry combustion and monitor the flow.
VOLTAGE AND CURRENT REQUIREMENTS: connect to the DC 12V voltage and the rated current is 300 mA to guarantee stable performance.
WIDE APPLICATION: this electric solenoid valve is suitable for water, high-end water heaters, smart fountains, water heaters, straight drinking machines, water purification machines, steam machines, energy saving air conditioning, water treatment, equipmentcooling and water industry and other sectors.
TYPE NORMALLY CLOSED: This is a normally closed type electric solenoid valve, it turns on to open it and turns off to close it.
Description
Technical characteristics:
Material: brass
Voltage: 12V
Nominal diameter: 1/2 "
Water pressure: 0.02-0.8 MPa
Dimensions: 6.5 x 6 x 3.5 cm / 2.56 x 2.36 x 1.38 inches
Weight: 218 g
1. Environmental conditions for the valvelow pressure solenoid valve inlet
Altitude: lt; 2,500 meters
Ambient temperature: 0 to 40 ° C
Relative air humidity: lt; 95% (temperature 25 ° C)
2.Type and nominal technical parameters
Type: guide solenoid valve (unidirectional)
Rated voltage: 12V
Rated current: 12v-300mA
Operating mode: short-term quota system (intermittent work cycle)
Insulation grade: E
Fluid use: (0-55 ° C) water
Use water pressure: 0.02-0.8 MPa
3. Water flow characteristics
Water pressure (Mpa): 0.02, 0.1, 0.3, 0.8
Flow (L / min): gt; 5 gt; 11 day18 gt;32
Nominal diameter: double 4-point thread, outlet diameter 13 (mm)
Life: gt; 100,000 times