Saillong 2 Pack White Fluorescent Starter for Use with 4-40W Preheat Fluorescent Lamps, CE Certified Fluorescent Tube Neon Starter Use in 110-130V (F S-2/s2)
[Trustworthy Quality]: this FS-2/S2 model fluorescent starter is made of aluminum studded base plate and quality plastic housing; Snap in design is more convenient; The quality is CE certified and trustworthy; It is not easy to break and ignite; Note: please check the rated voltage and current before use
[Easy to Replace]: the replacement fluorescent starter process is very simple; The position of the fluorescent starter is on the side of the fluorescent lamp, only needs to counterclockwise can be pulled out the starter to replace the replacement parts, and then replace the fluorescent starter, the replacement parts can be screwed clockwise to lock in place, and then turn on to check whether the light is on, if not, then you need to replace the fluorescent lamp
[Working Principle]: the fluorescent bulb starter is a small white cylindrical device, the inner part of the glow starter is a bimetal contact filled with neon gas, which mainly utilizes the bimetal's heat bending characteristics to connect and disconnect the power supply to enable the ballast to generate self induced high voltage to start the fluorescent tube
[Recognition of Failure]: you can easily tell if the glow starter is not working; Turn on the power switch, the fluorescent lamp flickers for a long time or does not light up then needs to be replaced; If you want to test the glow starter to see if it is shorted, you can use a multimeter to link the two terminals at the bottom (with the power disconnected); If the multimeter shows a number, it is a short circuit
[Decorative Use]: the fluorescent light starter not only helps to restore fluorescent lights to normal use but also can be applied as fairy lights to decorate for Halloween/Christmas and other festivals; Simply connect the string lights ( requires compliance with starter voltage conditions) in series with the fluorescent light starter to get a strobe mode fairy light
Description
If your fluorescent lights still don't light up when you turn them on, it's time to consider a new starter
CE certified. Trustworthy.
Nicely fit, please note the model number.
Fluorescent starter for use with 4-40W preheat fluorescent lamps.
Specification:
Material: plastic
Color: white
Quantity: 2 pieces in a pack
Compatible: FS-2/S2 type ballasts
Light Type: fluorescent
Voltage: 110-130V
Wattage:4-40W
Package includes:
2 x Fluorescent starters
Warm notes:
Make sure you adjust the current and voltage to the right level before use or it won't light up/too slow to light up.
The current of the ballast should be the same as that of the starter.
Should be given not to remove the aluminum casing from the starter and stare at that glow discharge too long without suitable eye protection because it could be giving out a lot of short wave UV that might cause an eye injury.
Fluorescent tubes had an expected lifetime that was based on the number of times you started it up.
GE Relax 6-Pack 65 W Equivalent Dimmable Soft White Br30 LED Light Fixture Light Bulb 3X Life
KWD 17.500
Lava Lamp Bulb 25 Watt, E17 Intermediate Base 6 Packs The Lava Original Replacement Bulb for 14.5-Inch Lava Lamp, Soft Warm White Glow, Long Life, High Temp Resistance, High-Output Heat S11 Bulb
KWD 3
Dimmable PAR30 Short Neck Flood Light LED Bulb - 9W (75W Equivalent) 3000K Warm White, Indoor and Outdoor LED Spotlight Bulbs, E26 Medium Base, 850 Lumens, 4 Pack
KWD 9.500
8-Pack E12 Ceiling Fan Light Bulbs, 60W Equivalent, Warm White 2700K, Small Base LED Candelabra Bulb for Chandelier, Type B LED Bulbs, 120V, Not Dimmable
KWD 6.500
