All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
【1 Year Warranty】We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
RATTMMOTOR K12-65mm Type Divding Head with 54mm Tailstock, Reducing Ratio 4:1 CNC 4th-Axis A-Axis Rotation-Axis, Indexing Head+K02-63mm 4 Jaw Chuck+Nema17 Stepper Motor for CNC Router Engraver Machine
KWD 62
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
KWD 23
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
KWD 35.500
RATTMMOTOR 3018 Pro DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm
KWD 57
