With about 1.8m Power Cable(3PIN US Plug)
Sub-drain valve to simulate circuits and solid state electronic timer solenoid valve to
match the compressed air system to achieve automatic timed condensate discharge
Widely used in gas tank, drip legs and other compressed air system components
There are test button and the intervals, emission time adjustment knob
Easy to install, fully automatic operation
Specifications:
Time interval (OFF): 0.5 to 45 minutes
Discharge time (ON): 0.5 to 10 seconds
Manual test button (micro switch)
Power supply voltage: AC110 50HZ
The current consumption of the largest 4mA
Ambient temperature: minus 40°C to 60°C
Shell material: Flame retardant ABS plastic
Electrical connection: DIN43650A
Indicator lamp: LED indicating power on / off
Type: two two direct-acting valve
In / out port size: 1/2"
Maximum working pressure: 1.6Mpa
Maximum temperature: 90°C
Forging brass valve, flow aperture of 5 mm
Insulation: class H
Protection grade: IP65
Voltage range: ±10%
Package included:
1 x Automatic Electronic Timed Drain Valve With US Plug Power Cable