Packing quantity and product color：2 per pack （orange ）

Product description：

These Urethane band saw tires are designed to fit any machine that requires a 1 inch by 0.095 inch by 14 inch bandsaw tire.
Tire Fits the following machines：for Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0555 G0457 G0555P G0555X G0580 T21005 G1019
G1019Z, Powermatic PWBS-14, PWBS-14CS.
The actual wheel diameter can be 13-1/2 to 14-1/2 in diameter.

Below are the steps on how to install polyurethane band saw tires：

Make sure to unplug your band saw whilst changing any parts or servicing it.
Urethane band saw tires don't require adhesive, but they do need to be stretched on.
Remove the old tires, and clean the machine of any dirt, debris, or adhesive.
The smaller tires can be fitted by stretching them on by hand.
If you can't get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in both directions and add clamps as you go.
A dowel rod or smooth tool can be used to pry the tire on.
Once the tire is securely on the wheel, the stretch will need to be smoothed out.
With a dowel between the tire and the wheel, roll it around the entire wheel.
More detailed versions of instructions can be found by searching for “urethane bandsaw tire installation” online.

prompt ：

There's no need to use adhesive with these as the Urethane material stretches to fit the wheel. This makes for easier
If your new band saw tire is too tight to install, please install and remove it. We recommend soaking in hot water ，before installation to make the material softer.