Yakamoz 0.6-6.5mm 1/40-1/4" Capacity Keyed Drill Chuck with 1/4-Inch Hex Shank Quick Change Conversion Tool

Feature:

- A great accessory for all your drilling tasks

- This metal made drill chuck attaches to 1/4" hex drives

- Allows screwdrivers with 1/4" Hex quick-change chucks to use round-shank drill bits

- Traditional 3-jaw Keyed tighten design with 1/4" maximum shank capacity

- Constructed from high quality steel for supreme durability.

Specification:

◆ Shank Type: 1/4-Inch Hex Shank

◆ Design: Classic 3-Jaw Keyed Design

◆ Capacity Range: 1/40" - 1/4" (0.6 - 6.5mm)

◆ Mount: 3/8"-24UNF

◆ Material: Steel

How to change bits?
1. Insert the chuck key loosen the chuck.
2. Turn the chuck key counterclockwise.
3. Remove the bit and insert a bit.
4. Turn the chuck key clockwise to tighten.
(While holding the bit in place with one hand, turn the chuck key clockwise to tighten the chuck's jaws with your other hand. Make sure to tighten it firmly so that the bit is secured. )
5. Remove the chuck key.

Please Note:
1. Remove your hand from the bit and turn on the drill to test it before using it.
2. Make sure the bit install straight enough, or it will wobble when you use it.
3. Compared with long bits, short bits can effectively reduce wobbling.
4. It can NOT be used counterclockwise.

5. Not suitable for impact drivers or applications involving high torque load.

Package Included:

1 x Drill Chuck