Table Inserts (Pack of 2) for 14" Band saws or Scroll saws（Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product）
Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
Make sure your insert recess has the locating pin on the side, not on the rear.
use on 14" Band Saws and 24" Scroll Saws.2&1/2" X .100 thick Please measure your saws recess to ensure proper fit
They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
(Set of 9) Nose cushion no mar tip Replacement Milwaukee 42-38-0017 (2746-00) nailer,No-Mar Pad Kit For M18 battery nailers/staplers
KWD 7
Table Inserts (Pack of 3) for 14" Band saws or Scroll saws,Diameter: 2.5 in, Thickness: 0.1 in.(Please make sure this is your size)
KWD 7
-11%
1/2'' N866410 N880093 N851276 N415875 hog ring replacement anvil assembly Fits Dewalt Black & Decker impact wrench DCF899 DCF899B DCF899M1 DCF899P1 DCF899P2 DCF899HB DCF899HP type 4.
KWD 12
-25%
Palart (3 pack) Part 219236 plastics Tips, For 16-Gauge Angled Finish Nailer,Fits IM250A, IM250S & IM250S-Li Nail gun No-Mar Tips
KWD 4.500
