Utoolmart Bore Drill Stop Drill Bit Depth Holder

Technical Parameters
Finish Type:Black Oxide
Material:Carbon Steel
Color:Black
Size:8mm/0.31 inch

Product Feature
1.Set-Screw type drill stop is suitable to use on a shaft softer than the set screw.
2.Slide the stop ring onto an unhardened shaft and tighten the set screw, the set screw would bite into the shaft and hold it.
3.This type of drill bit stop features great torque capacity and holding power.
4. The drill stop is suitable for low axial loads and simple positioning. Applications that require repositioning or high axial loads are not applicable.
5.Can be used to limit the movement of a shaft and retain power transmission components such as sprockets, pulleys, and bearings.
6.Mainly for fixing the drill bit, limited the depth of drill holes, make depth of the hole consistent. More convenient to round wood mortise of use.

Notes
1.In order to maximize the holding power, the shaft must be softer than the set screw.
2.Tightening the set screws will cause damage to the surface of the shaft, which is an inevitable disadvantage. Please do not move it after locking. To prevent this, small flats are often added under the set screw.

Package Content
2 x Drill Bit Stop