Specification:
Condition: 100% Brand New
Material: Alloy
Color: Shown As Pictures
Capacity: 2Watches
Maximum Test Height: 15.5cm/6.1in
Maximum Test Width: Approx. 7cm / 2.8in
External Air Pressure Connection: 6N
Pressure Test Range: 0.3-6.0bar
Cylinder Maximum Pressure: 10 bar
Size: Approx. 240 * 145 * 275mm/9.5 * 5.7 * 10.8in
Package List:
1 * Watch Waterproof Tester
Usage:
1. Fill the water tank to the specified level. Distilled water is preferred to prevent calcium deposition.
2. Hang the watch on the hook.
3. Replace the cover and tighten through 2 nuts.
4. Use the lever to increase the pressure to 3 atmospheres (according to the official standard of watch industry) and wait 3 minutes to watch the air inside.
5. Press the button to let the air escape immediately. When the pressure drops, observe the watch: if almost no bubbles escape from the shell, it is obvious that the seal is not good for escape.In this case, please get the watch out from the water.
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.