PT-PEX-02GB-OT is a Dual-Port PoE extender with sealing gasket inside and Aluminium Housing which are waterproof.It draws 60W or higher power of 95W(Max) and data from PoE Injector/PoE switch via 4 pairs of Cat5e/Cat6 cables to remote two PDs. On the PoE output side, there are two Channels which equipped 802.3af/at/PoE++ detecting chip and will Auto-negotiating 802.3af/at/PoE++ standard PDs.After negotiating,each port outputs 51W(Max)to terminal equipment.Such as wireless APs, base stations, network cameras, Wifi routers, Microwave radios and other PoE power Ethernet devices. 10/100/1000Mbps(Gigabit) of data rates.

Outdoor using based on 6KV(10/700us) lightning & surge protection design and Waterproof IP67 protection level for exterior,complex backhaul and networking applications. It works with input voltage of 44-57Vdc from PoE injector/switch and operates under -40℃ to +65℃ . The total effective distance from PoE injector to PD is 200 meters by CAT5e/CAT6 cables without local power. It can work longer to 500 meters with adding 4 PoE extenders. Easily to install with mounting holes, no need to open the equipment. With Stainless Steel Cable ties can be fixed on a Pole.
Attention:There will be power loss after adding two or more extenders,but the output power can be up to 51W a port with one extender.
- Operating Voltage:44-57Vdc(Max 60Vdc)
- Input:802.3bt/PoE++ PoE at 60W or higher power of 95W
- Output:55Vdc/0.92A per port, total 90W
- Power Pins:4/5(+), 7/8(-) and 3/6(+),1/2(-)
- Data Speed:10/100/1000Mbps
- Common Mode Protection Level(10/700us): 6KV,Protected line: 1,2,3,4,5,6,7,8
- Operating Temperature: -40℃ to 65℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -40℃ to 85℃
- Storage Humidity: 10% to 95%, non-condensation
- Operating Altitude: up to 5000meters
- Packing.：Manual x 1, Ground lug Wire: 16AWG